Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Compton?
Spring replacement in Compton typically costs $180 – $340 for one spring, including the new spring, labor, and balancing of the door. If both springs are replaced as a matched pair, which is the usual approach when one fails, expect roughly twice that range. The written estimate we give you on-site sets the final price.
That range holds for standard torsion springs on most residential doors across Compton, from the older single-car garages off Alondra to the tract homes near Crystal Park. What moves you up or down the range is the spring itself, how the door is built, and whether anything else has worn out alongside it.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers break down for a typical spring job in Compton. These are estimated ranges for this market, not fixed prices.
| Line item | Typical estimated range |
|---|---|
| Single torsion spring replacement | $180 – $340 |
| Matched pair of springs | About twice the single-spring range |
| Extension spring replacement (per side) | $180 – $340 |
| New lift cables when replacing springs | $130 – $250 |
| Roller replacement, if worn | $110 – $220 |
| Track realignment, if the door is out of square | $120 – $240 |
| Opener adjustment after spring work | Often bundled with the repair |
The spring itself is the smallest part of the bill. Labor is what you’re mostly paying for, and that labor is more involved than it looks: the tension has to come off safely, the new spring has to be wound to match the door’s weight, and the cables, drums, and opener travel all have to be checked before the door goes back into service. A door that lifts smoothly after the job is the proof the spring was matched correctly.
Two springs on a double-wide door cost more than one spring on a single-car door, not because the parts are exotic but because there’s twice the winding and balancing. If your door has a pair and only one has snapped, we’ll usually talk through replacing both at once. The second spring is the same age and carries the same cycles, so it tends to fail soon after the first.
For broader repair pricing across the other common jobs, our garage door service in Compton page covers the full picture.
What Affects Spring Replacement Pricing in Compton
No two doors price the same. Here’s what actually shifts the number on your estimate.
- Torsion vs. extension springs. Torsion springs mount on a shaft above the door; extension springs run along the sides. Most newer Compton homes have torsion, and that’s the standard case in the $180 – $340 range. Older garages with extension springs may need additional safety cables and hardware, which nudges the price.
- Door weight and width. A heavy wood door or a wide double-car door needs a heavier spring, sometimes a pair, and more careful balancing. That pushes toward the top of the range or above it.
- Spring cycle rating. Standard springs are rated for a certain number of open-close cycles. Higher-cycle springs cost more up front but last longer on a door that gets used heavily. If your household opens the door several times a day, it’s worth asking about.
- Condition of the rest of the system. If the cables are frayed, the rollers are flat, or the track is bent, those get addressed during the same visit. Each is a separate line item, and skipping them means the new spring does its job against worn hardware.
- Access and clearance. A garage packed to the ceiling, a low-clearance ceiling, or a door that won’t open at all can add time to the job. Compton garages are often tight, and clearing space before we arrive keeps the visit efficient.
- Brand and hardware. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, and the spring and hardware we source matches what’s on your door. A builder-grade Craftsman door and an architectural-grade Clopay take different springs.
How to Save on Spring Replacement
You can’t avoid the spring eventually, but you can keep the bill at the low end of the range.
- Replace the pair together. It sounds like more, but two springs replaced in one visit usually costs less than two separate service calls months apart. The second spring is already the same age as the first.
- Catch it early. A door that’s getting heavy, slow, or noisy is telling you the spring is tired. Waiting until it snaps often means the door drops and bends a panel or a track, which turns a spring job into a bigger repair.
- Clear the garage bay. Easy access to the door and ceiling saves labor time on the estimate.
- Ask about the rest of the hardware at the same visit. If rollers or cables need attention, doing it now avoids a second trip later.
- Get a free written estimate. Every price we quote is confirmed in writing before any work starts. Call (833) 593-3930 for an exact quote; estimates are free.
One thing we’ll always say plainly: don’t try to unwind or replace a torsion spring yourself. The tension stored in a wound spring is enough to cause serious injury, and the wrong tool or a slip can send the winding bars flying. This is a job for someone who does it every day. Same goes for the cables under tension.
Should You Repair or Replace the Whole Door?
If the door panels are solid and the frame is straight, replace the springs and keep the door. If the panels are rusted through, dented, or the door is on its last legs structurally, putting a new spring on a failing door just delays the bigger bill.
Rough guide: a full new door installation typically runs $700 – $2,200 in Compton depending on size and material. Panel replacement alone runs $250 – $500. If you’re weighing it, we’ll tell you straight which makes more sense for your door, without pushing the bigger job.
Can You Replace Springs the Same Day?
In most cases, yes. We keep common spring sizes on hand for the residential brands we work on, so a standard spring replacement can usually be handled in a single visit. If your door is an unusual size or brand, we’ll tell you up front what to expect.
Call (833) 593-3930. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you call outside those dispatch hours, we’ll book you into the next opening.
Why Choose a Specialist for Spring Work
Garage doors are all we do. That narrow focus means the technician who shows up already knows how a torsion system behaves, how to read a door’s balance, and how to match a spring to the door’s weight and cycle needs. We’re not a generalist arriving to figure it out on-site with a search engine open.
We’re factory-familiar with eight of the most widely installed residential door brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. If your door or opener is one of those, we’ve worked on it. That covers everything from builder-grade doors to architectural-grade hardware. If you’re not sure what brand you have, the model number is usually on a sticker on the opener motor or the door’s end stile, and we can identify it from there.
Our opener work spans both LiftMaster and Chamberlain, the two most common smart-compatible residential systems, so if spring replacement is part of a larger tune-up that touches your connected opener, we handle both in one visit. We also cover the wider Compton area for repair, opener repair, and new installation.
What a Typical Spring Replacement Visit Involves
Here’s what to expect when a technician arrives.
- Inspection. We check the springs, cables, drums, rollers, and track, and see how the door is balanced.
- Written estimate. You get the line items and the price in writing before anything is touched.
- Safe release of tension. The old spring’s tension comes off in a controlled way.
- New spring installed and wound. The spring is matched to the door weight and brought up to correct tension.
- Balancing and testing. The door is run up and down, the balance is checked, and the opener travel is adjusted if needed.
Most visits are done in a couple of hours. The point of all that testing is simple: a balanced door stays put halfway open and lifts smoothly with one hand. That’s the standard we hold every job to before we pack up.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Compton?
One spring typically runs $180 – $340 in Compton, including parts and labor. A matched pair costs about twice that range. Your written estimate sets the exact price for your door. Call (833) 593-3930 for a free quote.
Is it cheaper to replace one spring or both?
Replacing both at once usually costs less overall than two separate visits. One spring runs $180 – $340, so a pair is about $360 – $680, and doing it in one visit avoids a second service call when the second spring fails soon after. We’ll tell you on-site which makes sense for your door.
Do I really need to replace both springs if only one broke?
Usually yes, because both springs are the same age and have carried the same cycles. The second one is often close to failing when the first snaps. Skipping it means another repair soon. Call (833) 593-3930 and we can talk through your specific door.
How much does garage door spring repair cost versus full replacement?
Spring repair runs $180 – $340 for a single spring. A full new door installation typically runs $700 – $2,200 in Compton depending on size and material. If the door panels and frame are sound, replacing the spring keeps the door for a fraction of the cost of a new one.
Can you come out today to replace a broken spring?
Same-day service is common because we keep standard spring sizes on hand for the major brands. Call (833) 593-3930. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
What if my opener won’t work after a spring breaks?
The opener is often fine; it’s just working against a door with no spring support, so it strains or stops. Once the springs are replaced, we test the opener travel and adjust it if needed. Opener repair typically runs $120 – $320 if the opener itself is also worn.
Get a Free Spring Replacement Estimate in Compton
If your door is getting heavy, sticking, or making a loud bang, a tired spring is usually the cause and the fix is straightforward. We’re a single-trade specialist: garage doors, openers, and installations, nothing else. That means the person who shows up knows the job cold.
Call (833) 593-3930 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Compton market as of 2026. Garage Door Service Compton offers free estimates – call (833) 593-3930.
Written by the team at Garage Door Service Compton, serving Compton since 2012.
What Our Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Danielle Ziegler"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Hector Morales"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Maya Singh